These days more and more people try to find products that are made with sustainable materials.
So I guess you’re looking for a coffee maker that’s made without the use of plastic parts.
Finding one may be a bit hard, as most kitchen appliances do contain such components.
That’s why many of us would settle on one that’s at least free of Bisphenol-A.
Even though BPA isn’t banned by the FDA in most products, many companies have it substituted in order to proudly own a BPA-free label.
Nevertheless there is some evidence that the structural analogs of this synthetic compound aren’t less harmful than the bisphenol A itself.
A couple of my recommendations do contain BPA-free plastic, but it either doesn’t touch any liquid throughout the process of brewing, or it’s only in contact with cold water.
I’m pointing this out because some papers suggest that boiling water in plastic significantly increases the migration of synthetic compounds, such as BPA, into the liquid.
If you’re in a hurry, you can check out the following overview table of all reviewed coffee makers:
|1. Coffee Gator||All Stainless Steel||$$|
|2. Simply Charmed||Ceramic||$|
|3. Hario V60 Wood and Glass set||Wood stand with a glass dripper and decanter||$$$|
|4. Grosche Milano||All Stainless Steel||$$|
|5. Hario Syphon||Glass||$$$|
|6. Presto||Stainless Steel, but also contains aluminum||$$|
|7. Ovalware||Glass + Stainless Steel||$|
|8. Bunn VP-17-1SS||Stainless steel interior||$$$$$|
|9. Rancilio Silvia||BPA-free plastic water reservoir, lead-free brass boiler, brass/stainless steel portafilter||$$$$$$|
|10. Yama Tower||Glass||$$$$|
|11. Chemex||All Glass||$$|
|12. Cafelat Robot – Lever Espresso Machine||No plastic whatsoever, only premium materials, mainly stainless steel||$$$$$|
|13. Hario Woodneck Drip Pot||Glass pour-over decanter, reusable cloth filter, wooden decorative neck, completely free of plastic parts||$$|
|14. Flair Pro 2 – Reliable Lever Espresso Machine||Stainless steel, cast aluminum (the pressure gauge is plastic)||$$$$$|
In this post, I include quite a few 100% plastic-free coffee-making devices.
If you’ve been looking for one, you might’ve already noticed that such non-plastic makers are e bit hard to find.
Especially since the most widely spread single-serve and drip coffee makers are full of this slowly-degrading material.
At the same time, many of you are likely looking for one that contains no plastic parts, and no aluminum.
This metal is often incorporated in the making of espresso machines, Moka pots, and other coffee brewing devices because of its high thermal conductivity and lower cost compared to brass and copper.
The thing is that there are some concerns related to the regular exposure to aluminum and its plausible negative effect.
This is why I made sure to include some stainless steel interior coffee makers that are not only free of plastic but also aluminum-free.
So let’s get started.
The Best Coffee Makers Without Plastic: Top 13 Recommendations Reviewed
A couple of the products I listed do contain BPA-free plastic, but as I mentioned earlier – it either doesn’t touch any liquid, or it’s not in contact with heated water.
I made sure to include basic information and introduce you to the function of each reviewed item.
By reading through, you will most likely realize that there is a wider range of products you can choose from.
The Coffee Gator coffee maker is not only BPA-free, but it also has no plastic parts whatsoever.
It’s made of 100% high-quality stainless steel.
There aren’t any aluminum components that come in contact with the water, so you won’t have to worry about the plausible toxicity of this metal as well.
Overall it’s safe to say that if you switch to this coffee maker, you will pretty much end up using one of the healthiest ways of brewing a cup of Joe at home.
Not only that – the coffee Gator has a double screen filter.
This means that you will be able to have a cleaner cup with less sediment, compared to a standard French Press.
In comparison with the classic version, it would also keep your coffee hot for longer.
Not to mention that the Coffee Gator maker is well-built and the used materials make it sturdier than a glass press.
It would be relatively hard to break it, even if you tried, which makes it a long-term investment.
Many consider stainless steel French presses the most eco-friendly coffee makers. They are energy-efficient, durable, and therefore – sustainable.
If you’ve been using an automatic coffee maker or a single-serve brewer like a Keurig or a Nespresso it may seem that the process of making a cup with a French press is too much of a hassle. But try not to jump to conclusions too fast.
Just a couple of days after you start using it, you’ll forget that you’ve ever had another brewing device in your life. Now it may be useful to mention the basics of working with a French press.
In general, you need around 60 grams (7-8 tablespoons) of medium to coarsely ground coffee beans for a liter of water (34 fl oz).
You should steep them in the hot water for a while, stir a bit, press the plunger and your coffee is ready.
You can check out my step-by-step guide on how to use a French press for details.
When it comes to additional equipment it’s always better to have your coffee made with freshly ground beans.
With that being said, many people have their French press coffee made with pre-ground beans that are pretty much sold everywhere.
Such users are okay with not being as precise when it comes to the coffee-to-water ratio as well, so a scale isn’t a necessity for them.
They are usually perfectly satisfied with the results they get.
It all really depends on your goals and how rigorous you are about your coffee’s flavor.
Some people are complaining that the cleaning of the coffee Gator is a bit of a hassle, but I can assure you that’s not the case. Just rinse its parts with soapy water after use (the sooner you rinse, the easier it would be to clean).
If you let it sit for too long – it may be a bit harder to remove all the coffee bits off the double screen filter.
I wouldn’t place the Coffee Gator in a dishwasher though – this may compromise its sleek look (but not its performance).
Related read: How to dispose of coffee grounds from a French Press?
Overall I can wholeheartedly recommend getting this stainless steel coffee maker as it won’t add any plastic or metal taste to your coffee.
The Coffee Gator French Press is definitely one of the safest and sturdiest devices listed here.
This product can be a healthy and a more eco-friendly alternative to, say, a single-serve Keurig machine.
The ceramic coffee dripper by Simply Charmed is definitely one of the best coffee makers without any plastic parts in it.
It comes at a great price and it is quite easy to use.
By making your cup of Joe with this dripper you won’t have to worry about BPA or any other toxic chemicals entering your coffee mug.
This ceramic coffee maker is actually a pour-over brewing device.
You sit it onto your mug, then place a filter (Melitta size 2) in the ceramic dripper, and add coffee grounds.
Then you heat some water and pour it over your ground beans with a kettle.
As the hot water runs through the grounds, they get extracted and the delicious coffee ends up in your cup.
Again, I would highly recommend using freshly ground coffee, but if you don’t have a grinder at home, using pre-ground coffee would work as well.
Make sure to check if there is a coffee shop in your area and get high-quality freshly roasted ground beans.
Those are always better than buying a vacuum-sealed ground coffee bag at the supermarket.
Anyway, along with the plastic-free coffee maker, you’ll get 40 Melitta natural brown coffee filters.
Of course, after you use them up, you will have to buy new ones. You can check the price of the Melitta filters on Amazon here.
The only disadvantage of this non-plastic coffee maker is that it’s only suitable for people who don’t make more than one cup of coffee at a time.
Nevertheless, it’s surprisingly easy to clean, so if another family member or a roommate needs to use it after you – just throw away the used filter with the grounds, and rinse the dripper.
With that being said, the Simply Charmed coffee maker is definitely one of the best single-serve devices without any plastic parts.
3. Hario V60 plastic-free coffee making set (all glass and wood components)
The Hario V60 wooden stand, combined with a glass dripper (size 02) and decanter is a perfect set for anyone who’s looking for a plastic-free coffee brewing device.
It looks fantastic on the kitchen counter and the process of cleaning it after each use is pretty much effortless.
Furthermore, apart from being one of the most eco-friendly and least toxic coffee makers (no plastic, no aluminum – only glass and wood), by using a Hario V60, you can make an exceptional cup of coffee.
There is only one rubber component in this set – the glass lid of the decanter has a rubber ring on it, which ensures a tight seal and keeps your coffee hot for longer:
If it doesn’t fit your budget, instead of getting the glass dripper, decanter and wood stand set, you can get a ceramic Hario V60 dripper, like this one:
The 02 one is the most widely spread.
With it, you can easily brew 1 cup at a time, but it’s also suitable for brewing 2 cups at once.
With the 01 it will be challenging to brew more than 1 cup of coffee at a time, while the 03 has a larger capacity and you may use it to make 3 servings of coffee in one brewing cycle.
Anyway, the Hario V60 plastic-free set consists of a 02 glass dripper and a 02 Hario glass decanter.
Regardless of whether you get the wooden stand with a glass dripper, or the ceramic dripper, you’re going to need some filters too.
Luckily, the wooden stand V60 set comes with 100 02-sized filters.
Of course, once you run out of them, you’ll need to restock.
When it comes to the V60 pour-over brewing method, there are a few things to mention.
Basically, to use such a device you need to place a paper filter in the dripper, rinse the filter with hot water, discard the rinse water, pour your coffee grounds (medium-fine grind) into the filter, and start pouring freshly boiled water over them.
The downside of using a glass or ceramic Hario V60 dripper instead of a plastic one is that the latter is better at heat retention, and therefore provides a better extraction.
So you should use as-hot-as-possible water to ensure proper extraction. Especially if you use lightly roasted coffee beans.
Furthermore, if you want to make an excellent cup of coffee with your Hario V60, you need to be more precise with your pouring technique.
This means that you may want to get a gooseneck kettle.
To achieve impressive results, you also need a suitable for pour-over coffee grinder, which will provide a consistent grind on coarser settings, and a scale that will help you weigh your coffee-to-water ratio accurately.
Most importantly – you’re going to need high-quality beans and good water.
With all being said, you can make a good cup of coffee with your Hario V60 even without the aforementioned accessories.
So if you’re new to the world of specialty coffee, it may seem to you that you don’t need all this equipment to make your morning cup of Joe.
If that’s the case, only get the Hario V60 wood stand set or the V60 ceramic dripper.
With time you will likely get curious about improving the taste of your homemade coffee and you’ll find the investment in other accessories reasonable.
With all being said, the Hario V60 plastic-free coffee-making set is perfect for anyone who wants to make a satisfying cup of coffee at home.
So you should definitely consider it as an option if you’re looking for a way to reduce the use of plastic appliances in your kitchen.
I highly recommend this easy-to-use coffee maker to anyone who looks for one with a stainless steel interior.
The Grosche Milano contains no plastic parts and is an overall better alternative to a classic Moka pot, as it’s not made of aluminum.
You could say it’s the healthier alternative, and you won’t have to worry about any toxic chemicals coming from the plastic or the potential harm that aluminum parts may cause.
On top of the aforementioned, the Grosche Milano Maker is built with durable materials and it is pretty sturdy, serving its owners for years to come.
In regards to coffee flavor, it’s much better and cleaner compared to a classic Moka pot, which often adds some metal taste to the end result.
On that note, the handle is also made of stainless steel, so you won’t have to worry that it will melt.
Anyway, there are 6-cup and larger 10–cup versions that are 9.3 fl. oz. and 16.9 fl oz., respectively.
To use this non-plastic coffee device just add water to the bottom chamber, and place the filter on it.
After that, simply put some coffee grounds into the stainless steel filter, and screw the top chamber on.
Now it’s time to put it on the stovetop. In a short while delicious coffee will start pouring into the upper chamber.
Don’t be in a hurry to scroll down to my next suggestion. This siphon coffee maker does fit your criteria!
The chambers of the Hario 5 Syphon Vacuum Pot are all made of glass.
There is no plastic coming in touch with hot water during the process of brewing, so it provides non-toxic end results.
Most importantly – with this device, you will likely get the chance to enjoy the best cup of coffee that you’ve ever had.
Having said that, let’s see how this cool coffee maker works.
What I recommend doing is this:
- Preheat water and pour it into the round glass container.
- Add the filter to the top chamber and make sure the ball chain is secured to the side of the glass stem with its hook.
- Attach the hopper to the globe on the bottom.
- Then turn on the heat source and wait for the water to start boiling.
The vacuum pot I linked to comes with an alcohol burner, but I recommend getting a butane-based like this one, as it will heat the water much faster (less than a minute if the water is preheated).
In a short amount of time, the difference in pressure will force the heated water up through the glass stem into the top chamber (also called hopper).
- Then you should add the grounds to the hopper and make sure all of them remain submerged.
At this point, you just turn down the butane burner to its lowest setting and wait for a minute.
- Turn off the heat source and stir the slurry with a spoon in the top chamber while the coffee drains down.
- Remove the hopper with a kitchen towel as it may be hot and place it on its stand (if you turn the hopper lid upside down – it serves as a stand).
Now you can pour the coffee from the lower glass chamber straight into your cup.
You can look up different brewing techniques and find the one that suits your taste best.
I won’t waste your time and include all of them, but it’s worth noting that the coffee-to-water ratio in the manual of the device, results in a cup that may be a bit too strong.
For this reason, make sure you pour in a lower amount of ground beans than what the instructions say.
Anyway, this glass device isn’t for people who consider themselves clumsy, as it’s more fragile than the stainless steel makers I mentioned earlier.
Also – if you make your cup of coffee before work and you’re usually in a hurry – the Hario 5 Glass Syphon isn’t the best option.
It requires a bit more of your attention and involvement throughout the process of brewing.
With that being said, if you work from home and you have more time in the morning, or you plan on using your coffee maker only during the weekends, this fancy vacuum pot may be the perfect pick for you.
Some people say that they only use it to impress their guests or when they feel bored.
Nevertheless, contrary to what you may expect, many people use it daily, as not only the coffee ends up amazing, but the whole process of brewing is somewhat therapeutic.
You should know that the filter requires some care too. You may want to rinse it after each use and keep it in a jar with clean water in the fridge.
This way it won’t affect your coffee’s taste. It’s also a wise move to boil it every once in a while in order to maintain its good performance.
After all, it’s the filter that keeps all the coffee sediment away from your cup and also makes the well-balanced coffee taste possible.
Another thing to keep in mind is the fact that you have to refill your butane burner with fuel.
If you use preheated water – it won’t be as often, but that’s definitely something to be considered before purchasing the glass siphon.
After all, I decided to include this beauty in my list, as I’m sure that some of my readers will find it to be the best coffee maker without internal plastic parts for them.
If you’re not one of those readers – well, now you know that this device exists, and it’s a great present for a passionate coffee enthusiast if you happen to know one.
Here is another coffee maker made of stainless steel.
Percolators were the most widely spread coffee brewing devices in the United States 60 years ago.
Back then there weren’t automatic drip machines that are made with all those plastic parts.
Most households were using stovetop percolators and people weren’t worried about their coffee having plastic flavor notes.
Anyway, have in mind that the heating element at the bottom of the Presto device is made of aluminum.
This may be a deal-breaker for some of you that are looking for a coffee maker that is free of both plastic and aluminum parts.
If you’re interested in a percolator with no aluminum parts coming in contact with water – click this link to see such a product by Farberware.
The thing is that according to my research it isn’t as sturdy as the Presto one. Furthermore, the Presto percolator is capable of producing a better-tasting cup of Joe.
A great number of people have found it to be the most convenient device for preparing a cup.
It’s also an eco-friendly and a rather healthy non-plastic alternative to using other widely spread automatic makers.
To be fair, it’s not my favorite brewing device, to say the least, as it doesn’t provide proper conditions for optimal extraction of the coffee grounds.
But bear in mind that I’m a coffee lover, who’s aiming to pull all the subtle flavor notes out of my beans.
This is why I’m willing to put in a bit more effort while making my cup of Joe.
So if you’re picky about your coffee’s flavor, this isn’t the best product for you.
On the other hand, if you drink coffee from a, say, Keurig machine on a daily basis, or you tend to add a good amount of creamer, milk, or sweeteners to your coffee, the Presto will suit you more than well.
This Ovalware Glass Cold Brew Infuser is possibly one of the healthiest coffee makers out there.
Its components include a glass carafe, a medical-grade stainless steel filter, and a BPA-free silicon airtight seal.
There are no plastic parts that come in contact with water during the process of extraction.
At the same time, it’s capable of producing a smooth and rich cup.
These qualities all contribute to the fact that the Ovalware Cold Brew coffee maker is one of the best non-toxic devices that you can use to make your coffee.
Another thing to note is that this device is also extremely easy to use.
You simply place coarsely ground beans in the filter, pour room-temperature water into the glass carafe, and seal it with the lid.
In 12 to 24 hours your cold brew coffee will be ready. After it’s done, remove the filter, rinse it, and pour the coffee into your cup.
Anyway, there are some things to be aware of before buying this fancy-looking coffee maker.
Firstly, I would NOT recommend washing the carafe in the dishwasher. Simply rinse it after use, as it’s super easy to wash by hand.
Secondly, some customers report that the carafe is too fragile, which is why the Ovalware team has added a rubber cushion base that can be used for extra protection.
That being said, I wouldn’t say that the carafe is as fragile as often described, so if you take proper care of it, it will last long.
Another thing – the filter does let some of the coffee bits enter the carafe, especially if the grind is too fine or if there are many small coffee particles (coffee fines).
This is actually rather common for this kind of permanent stainless steel filters. What’s important to remember is to grind your beans coarsely!
I personally don’t think that there would be too much sediment to the point of affecting the coffee taste tremendously.
With all being said, the Ovalware cold brewer is a perfect pick for those in search of a safe non-plastic coffee maker to brew coffee at home.
This entry is also fantastic for those of you who are looking for a non-toxic way to make coffee.
The Bunn VP17-1SS is a commercial-grade coffee maker with a stainless steel interior.
You can easily replace its plastic funnel with a metal one, making this coffee machine virtually plastic-free.
Aside from the water grate on top of the Bunn VP-17, everything else that the water touches during brewing is metal with the exception of some small food-grade silicone bits.
Many people have their drip coffee makers replaced with this non-plastic alternative, not only because it’s better for their health, but also because it’s capable of quickly producing a delicious cup of coffee.
This stainless steel brewer is very sturdy, so if you end up investing in the Bunn VP-17, you will get to enjoy its flawless performance for many years to come.
For this reason, it’s safe to say that the Bunn VP-17 is the best coffee-making machine that has no plastic parts inside.
To use it, you need to purchase these 12-cup commercial coffee filters. You can click the link to check them out on Amazon.
If you visited the link you can see that you’ll be getting a pack of a thousand filters, which means that you won’t have to restock on those for at least 2 and a half years upon regular use.
It’s worth noting that they also come at a great price.
Anyway, as I mentioned, to make sure that hot water doesn’t come in contact with any plastic throughout the process of brewing, you should also get the stainless steel filter basket – click here to see the exact Bunn funnel unit I’m referring to, on Amazon.
To make the whole thing work as needed you may also need a metal tip for the funnel that fits into its hole.
It’s a bit odd that this part comes separately. Anyway, to save you up some time in research, here is a link to the funnel tip kit.
Anyway, the Bunn VP-17 comes with an instruction manual, that’s really easy to follow.
At first, it may feel like it’s a bit too much work to install the machine, but that’s not actually the case.
I’m frankly surprised at how carefree the whole process is.
When it comes to the maker’s performance – it’s simply flawless.
The coffee it makes is truly delicious, and, most importantly, there is absolutely no plastic or metal taste to it.
Other than that, it’s good to know that you should have the machine plugged in for at least half an hour before you start brewing.
Also, another thing to take into consideration when going for the purchase is the coffee maker’s dimensions:
As you see, the body is quite big, so make sure to free up enough space on your kitchen counter.
All things considered, if you end up dedicating a spot for this commercial-grade coffee maker, I’m sure you won’t regret it.
You’ll most likely ask yourself why you haven’t made the decision to invest in the sturdy Bunn VP-17 earlier.
It’s the best plastic-free product for you if you’ve set a higher budget and you aren’t willing to try out some of the manual coffee brewing devices I mentioned above.
This type of coffee maker with a stainless steel interior that also requires no tubing, and is easily portable, is hard to find.
This is an espresso machine that has a really good reputation among coffee enthusiasts.
I couldn’t leave it out of my list, as it’s just a high-quality coffee maker that will allow you to enjoy different types of classic coffee shop drinks at home.
The Rancilio Silvia is also one of the least toxic prosumer espresso machines for home use.
Its water reservoir is made of BPA-free food-grade plastic, but only cold water goes in it.
This means that the chance of potential leakage of toxic chemicals is drastically decreased.
On top of that, the Rancilio Silvia has a ~10 oz. (0.3 liters) lead-free brass boiler.
The steam wand, which is used to froth milk, is made of stainless steel.
The portafilter is made of chrome-plated brass, and the filter baskets are made out of stainless steel as well.
No aluminum comes in contact with water throughout the process of brewing.
Therefore it’s safe to say that the Rancilio Silvia is not only one of the best espresso machines, but also one of the healthiest, considering the materials it’s made of.
It’s worth noting that the Silvia has silicone hoses that transport the water from the water reservoir, and a silicone group gasket, so this may be a deal-breaker to some of you.
Furthermore, the machine is somewhat expensive.
The portafilter this coffee maker comes with is a commercial one. You will get a single and a double non-pressurized filter baskets with it. So you’ll be able to make both single and double espresso shots.
Have in mind though that the non-pressurized portafilter requires a very precise espresso-fine grind, unlike its pressurized counterpart.
This means that you need a high-quality burr grinder too.
If yours isn’t good enough you won’t be able to pull a decent shot.
If you have the means, get the Rancilio Silvia along with their Rocky burr grinder (click the link to check it out on Amazon).
Both products are quite sturdy and are definitely worth the investment.
It may be a wise decision to also purchase a decent tamper, like this stainless steel one.
Tamping the grounds and making sure they are evenly distributed throughout the basket is an essential part of the brewing process.
The plastic tamper the machine comes with is not going to do a decent job in that aspect.
If you’re a fan of latte art, you will also need a steel pitcher that’s used to froth the milk.
I recommend checking out my detailed beginner-friendly guide on how to pull an espresso shot for step-by-step instructions with photos and more helpful tips.
Anyway, as a person with a barista background, I can assure you that this machine is worth every cent.
The Rancilio Silvia is made in Italy and is the closest to a commercial-grade espresso machine you can get for home use.
It’s made with high-quality materials and most importantly – it’s as toxic-free as an espresso machine can get.
The Yama Glass coffee tower is an all-glass cold drip coffee maker.
It’s free of plastic components and is capable of producing a cup of coffee that’s simply amazing.
There is actually a difference in the taste of full immersion (a method I mention above) and slow drip cold brew coffee.
By using a brewing device such as the Yama coffee tower, you’re more likely to sense the intrinsic flavor profile of the beans you use.
That’s highly-appreciated by fans of single-origin specielty coffee beans.
Anyway, I won’t get into the nitty-gritty of the differences between full-immersion and slow drip cold brewing methods.
I know that some of you didn’t even know that such a device exists.
To get a better idea, see how the Yama Glass cold drip brewer (8-cup version) works in the following video:
Basically, you pour grounds into the vessel in the middle and add water and ice to the upper jar.
By adjusting the valve you will get to set the drip frequency – how many drops of water per second (1 to 1.5 drops per second work well).
While the water passes through the grounds, they get soaked and extracted.
In 3 to 6 hours the bottom carafe will be filled with delicious cold brew coffee.
And most importantly – you won’t be ingesting any toxic chemicals when you take a sip.
If you purchase this Yama tower, you’ll also get the permanent ceramic filter which is to be placed at the bottom of the middle glass component.
It’s important to add a round paper filter on top of the grounds to make sure the water is evenly distributed over them.
If you need to restock on those, you can get some cheaper AeroPress filters, that fit perfectly (Yama-branded ones are more expensive).
Have in mind that you should adjust the drip rate manually in an hour or two after your initial setup.
In time water levels in the top chamber are dropping, which creates less pressure, and the drip speed decreases.
Cleaning the glass components is quite easy. I wouldn’t place them in the dishwasher though – they’re, after all, made of glass.
It may seem that it takes too much time to brew coffee this way, but if you set your tower the evening before, you’ll get to enjoy a cup the following day, after you wake up, without the early morning hassle.
Anyway, I thought that if you’re looking for a non-plastic coffee maker, I should definitely introduce this device to the list.
The Chemex pour-over coffee maker is one of the best devices to brew coffee in, and that’s not only because it’s totally free of plastic and aluminum parts.
The original Chemex filters actually trap coffee oils, which results in a less acidic cup of coffee.
A coffee made through the use of such a double-bonded filter contains less diterpenes – substances, related to an increase in cholesterol levels.
Therefore the Chemex pour-over device lets you make coffee at home in one of the healthiest ways.
By looking at the photo above, you can see how stylish the Chemex carafe is.
It’s made of borosilicate glass, which is more resistant to thermal shock and overall – more durable.
It’s really easy to wash and it looks cool wherever you place it.
Nevertheless, the filters are the most important feature that the Chemex inventor, Dr. Peter Schlumbohm, came up with.
They are the ones that actually trap coffee sediment, which results in the cleanest cup of coffee a pour-over device is capable of producing.
At the same time, as I mentioned, they filter most of the coffee oils, which means a lighter-bodied cup of coffee.
The latter is better if you’re looking for an unbleached alternative.
The filters may seem a bit too pricey, so bear in mind that you can also use a permanent Chemex filter with your glass carafe.
The thing is that through the use of such a substitute you will yield a different type of coffee – fuller-bodied.
If you want to find out more about Chemex filters and their reusable alternatives, click this link.
You need to evenly distribute the hot water over the grounds with more precision. So a gooseneck kettle may be a good investment.
The pouring technique is important because of the large neck of the Chemex carafe.
To get consistent results, you may also need a scale to use an accurate coffee-to-water ratio each brew cycle.
Bear in mind that you need a good-enough grinder, that’s capable of producing consistent grind on a coarser setting.
To spare you some time in research, I can wholeheartedly recommend the Baratza Encore burr grinder.
This is the one I started achieving great results with.
The manual Timemore Chestnut C3 Pro is another great budget-friendly burr grinder that is perfect for brewing with a Chemex.
There will be a period of trial and error at the beginning, but trust me this device is capable of yielding a simply amazing cup of coffee.
You can check out my complete Chemex brewing guide. There you will find easy step-by-step instructions on how to use it properly.
To be fair, it’s a fun experience to master your Chemex skills.
Most importantly, this Chemex glass carafe in combination with its filters is all you need – no plastic, no BPA, no aluminum, no controversial materials that may cause harm in the long run.
Overall, by opting for a Chemex coffee maker, you will end up with one of the safest ways of making coffee at home.
Related Post: Best Chemex Accessories
12. Cafelat Robot
The Cafelat Robot is a lever espresso machine that has no plastic parts whatsoever.
It’s made with premium materials (mostly stainless steel) and it’s capable of producing excellent espresso shots.
If you’re passionate about coffee and you’re looking for a plastic-free coffee maker, consider getting the Cafelat Robot.
To pull a shot, you need to put your coffee grounds into the filter basket, place the dispersion screen on top of the coffee bed, and add off-the-boil water into the basket.
Then you place the basket into the holder and screw it onto the machine.
After you do that, you should press the handles and push the water through the coffee. This creates pressure, which you can control by looking at Cafelat’s pressure gauge.
This plastic-free espresso maker also comes with a tamper.
Of course, to pull decent shots, you’re going to need a nice burr grinder that performs well on fine espresso settings.
Furthermore, you may want to get a scale that you can fit underneath your cup while you’re pulling the shot.
This Weightman pocket scale is an affordable product that fits the Cafelat Robot.
With all being said, this lever espresso machine is one of the best and most-eco friendly coffee-making devices on this list. Not to mention that it’s capable of producing high-quality espresso shots, such as those you’d get from a coffee shop. So if you’re a fan of great espresso and want to go 100% plastic-free, go for the Cafelat Robot.
The Hario Woodneck Drip Pot is a pour-over coffee brewing device that has no plastic parts.
Because of its reusable cloth filter, the Woodneck dripper is capable of producing an exceptional type of brew that combines texture and flavor complexity in an unique way.
Because of the materials it’s made of, and the fact that you can make one of the best-tasting cups with it, the nel drip is one of the top plastic-free coffee makers that you can get for home use.
With that being said, there are some disadvantages that you should consider.
As with other pour-over drippers, with the Woodneck drip pot you’d need to put a bit more effort into your coffee preparation routine to reveal the full potential of the brewer.
Furthermore, the cloth filter is a bit harder to maintain, as it’s prone to acquiring unpleasant moldy smell.
Nevertheless, there are ways to upkeep the flannel coffee filter to avoid that.
Once you get used to using and taking proper care of your nel drip, you will be more than happy with its performance.
I recommend visiting my complete Hario woodneck drip pot review guide that contains intructions on use and maintenance.
Click here to check out the price and more photos on Amazon.
If you’re an espresso fan and you’re looking for a coffee maker with no plastic coming in contact with hot water, the Flair Pro 2 is definitely one of the best products for you.
It’s easy to use once you get the hang of it, and it will let you enjoy consistently good espresso shot after shot.
Prosumer espresso machines are rather expensive, so if you want an affordable alternative that will let you enjoy the same quality, the Flair Pro 2 is a top choice.
Furthermore, you won’t have to worry about your coffee being contaminated with BPA and other chemical substances that may be leaking from plastic.
The Flair Pro 2 has a stainless steel brew head and stainless steel bottomless portafilter which makes it easier for you to observe the flow when pulling shots.
Looking at how the espresso stream, running through the portafilter is not only satisfying but it can also help you improve your technique, and enjoy outstanding espressos, ristrettos, and lungos at home.
The pressure gauge, as well as a few other small elements on the Flair are, in fact, made of plastic, but that’s about it. The rest is cast aluminum and stainless steel, which means that this lever coffee maker is built to last.
Therefore, if you’re trying to live a more sustainable lifestyle, this product definitely matches your values.
It does take a little bit of time to get used to operating with this lever machine. Especially if you haven’t used one in the past.
Nevertheless, once you get accustomed to the workflow of your Flair, it would only take 5 minutes for you to pull the shot of your dreams.
It’s also worth noting, that you need a proper grinder if you are to use this type of espresso coffee maker. While the Rocky (that I mentioned earlier) is a great option, you can get a more affordable alternative, such as the JX-PRO Manual Burr Grinder. The JX-PRO and the Flair PRO 2 are a great combo, not only when it comes to the quality of the shot.
They are also perfect for travel, as they’re both quite easy to pack-up and carry around. This will let you enjoy a delicious espresso virtually anywhere you go.
In conclusion, if you’re a passionate espresso lover, who’s looking for an eco-friendly, plastic-free coffee maker that’s built to last, get the Flair Pro 2. You won’t regret it.
Over to You
If you’re trying to reduce your exposure to toxic chemicals, it may be wise to go for a plastic-free alternative to the product you need whenever you have the chance.
When it comes to coffee makers, unfortunately, the most widely spread ones are mainly made of plastic.
Nevertheless, with such a mainstream maker you can’t make coffee nearly as good as the one made with, say, a decent espresso machine, a plastic pour-over device, or even a French press.
The thing is that the more healthy and sustainable devices are a bit more time-consuming compared to the convenient automatic single-serve or drip machines.
But let’s be honest – a little bit of extra time spent on preparing a cup, gathering your thoughts, and not looking at a screen can be quite refreshing.
At the same time, if more of us, consumers, opt for coffee makers that have no plastic whatsoever, more companies will start producing a variety of sustainable, yet convenient plastic-free alternatives.
Anyway, I hope I managed to help you decide on one of the healthy coffee makers on my list. Share in the comments below which one you picked. I’d also love to find out whether you have other recommendations.